Research
Faculty Publications
A Comparative Study of Strength and Water Absorption Rate of Plastic and Brick with Different Bricks
Chinmoy Goswami, Debashish Ranjan Nath, Jiban Jyoti Kalita, Manjuri Hazarika
Dr Manjuri Hazarika
Proc. of International Conference on Robotics, Automation & Mechanical Engineering (ICRAME 2026)
Analysis of Output Performance Measures for Stir-Cast Aluminium 6061-Fly Ash Composites by Non-dominated Sorting using Pareto Front
Mehdi Mehtab Mirad, Mohd Azlan Suhaimi, Sushmita Deka, Mohd Aslam, Guddakesh Kumar Chandan, Dhinakaran Veeman
Dr. Sushmita Deka
Journal of Molecular and Engineering Materials
Recent Advances in Wind Energy Technology: A Review with Special Emphasis on various Design factors affecting Vertical Axis Wind Turbines
Jiban Jyoti Kalita, Abhinab Kakati, Chinmoy Borgohain, Debarshi Choudhury, Dheemanta Dhrupad Chutia, Rhiddhiman Gogoi
Mr. Jiban Jyoti Kalita
International Conference on Advances in Manufacturing, Thermal and Design Engineering, NIT Hamirpur
Soft computing analysis for estimation of the combustion characteristics of a biogas-fuelled spark ignition engine
Sushmita Deka, Santosh Kumar Hotta, Sanjukta Patra, Niranjan Sahoo
Dr. Sushmita Deka
Combustion Theory and Modelling
Analysis of output performance measures of coating in EDM by non-dominated sorting using pareto front
Rashed Mustafa Mazarbhuiya, Sushmita Deka, Maneswar Rahang, Dhinakaran Veeman
Dr. Sushmita Deka
Journal of Molecular and Engineering Materials
Optimization of End Milling Process Parameters on AISI 1018 Steel for Enhanced Material Removal Rate and Surface Finish
Rishamoni Hazarika and Manjuri Hazarika
Dr Manjuri Hazarika
Proc. of International Conference on Advances in Materials, Manufacturing & Industrial Management 2025, November 7th – 9th 2025, NIT Kurukshetra, Haryana, India, 2025
Optimization of tribological performance parameters with varying percentage of Halloysite nanotube in polylactic acid/bamboo/kenaf hybrid sustainable biocomposites
Chaiki Malakar, R Ravivarman, Sushmita Deka
Dr. Sushmita Deka
Polymer Bulletin
Sensitivity study of force recovery algorithms for aerodynamic drag assessment on a spiked blunt body in high-speed regimes
Sushmita Deka, Abhishek Kamal, Ramesh Babu Pallekonda, Vinayak Kulkarni, Niranjan Sahoo
Dr. Sushmita Deka
Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering
Assessment of accuracy of multi-point calibration and single point calibration technique using an accelerometer force balance
Sushmita Deka, Sanjukta Patra and Niranjan Sahoo
Dr. Sushmita Deka
58th 3AF International Conference on Applied Aerodynamics (2024), Ecole Polytechnique, France
Experimental Analysis of Force Recovery and Response Time Using Strain Measurement Sensors in Stress Wave Force Balance
Abhishek Kamal, Sushmita Deka, Niranjan Sahoo, Vinayak Kulkarni
Dr. Sushmita Deka
SAE Technical Paper
Numerical Investigation of Aerodynamic Characteristics on a Blunt Cone Model at Various Angles of Attack under Hypersonic Flow Regimes
Sushmita Deka, Abhishek Kamal, Sanjukta Patra, Niranjan Sahoo
Dr. Sushmita Deka
SAE Technical Paper
Wear and frictional characteristic of natural fiber reinforced polymer composites: a review
Dr. Kalyan Kumar Singh, Jiban Jyoti Kalita
Mr. Jiban Jyoti Kalita
Challenges and Opportunities in Industrial and Mechanical Engineering: A Progressive Research Outlook
Comparative assessment of engine vibration, combustion, performance, and emission characteristics between single and twin-cylinder diesel engines in unifuel and dual-fuel mode
Akash Chandrabhan Chandekar, Sushmita Deka, Biplab Kumar Debnath, Pallekonda Ramesh Babu
Dr. Sushmita Deka
Journal of Energy Resources Technology
Measurement technique for ideal selection of sensors and accurate force recovery on aerodynamic models
Sushmita Deka, Abhishek Kamal, Ramesh Babu Pallekonda, Maneswar Rahang, Vinayak Kulkarni
Dr. Sushmita Deka
Experimental Techniques
Comparative assessment of modified deconvolution and neuro-fuzzy technique for force prediction using an accelerometer balance system
Sushmita Deka, Pallekonda Ramesh Babu and Maneswar Rahang
Dr. Sushmita Deka
Measurement
Machinability of silicon and German silver in micro electrical discharge machining: a comparative study
Sushmita Deka, Siddhartha Kar, Promod Kumar Patowari
Dr. Sushmita Deka
Silicon
A new method for force prediction in an accelerometer force balance system using support vector regression
Sushmita Deka, Pallekonda Ramesh Babu and Maneswar Rahang
Dr. Sushmita Deka
Transactions of the Institute of Measurement and Control
Dynamic Calibration of Three-Component Accelerometer Force Balance System Using Deconvolution
Sushmita Deka, Pallekonda Ramesh Babu and Maneswar Rahang
Dr. Sushmita Deka
Advances in Mechanical Engineering
Finite element analysis on the effect of the cross sectional shape on the response of a stress wave force balance
Sushmita Deka, Pallekonda Ramesh Babu and Maneswar Rahang
Dr. Sushmita Deka
6th National Symposium on Shock Waves (NSSW-2020), IIT Madras
Influence of stress bar length on the response of a stress wave force balance using finite element analysis
Sushmita Deka, Pallekonda Ramesh Babu and Maneswar Rahang
Dr. Sushmita Deka
Advances in Mechanical Engineering
Study and Analysis of a Solar Power System
Souvik D Roy, Dhiraj Rabha, Mahmoodul Hasan, Manjuri Hazarika
Dr Manjuri Hazarika
National Conference for Students on Advances in Mechanical Engineering (NCSAME), Assam Engineering College, Guwahati, 6th March, 2020
A Study on Effect of Process Parameters on Vibration of Cutting Tool in Turning Operation
Rupam Das and Manjuri Hazarika
Dr Manjuri Hazarika, Dr Manjuri Hazarika
Journal of Physics, IOP Conf. Series:1240, pp. 1–10, 2019
Dynamic Calibration of a Single Component accelerometer force balance under application of impulse loads
Sushmita Deka, Pallekonda Ramesh Babu and Maneswar Rahang
Dr. Sushmita Deka
In International Heat and Mass Transfer Conference (IHMTC-2019), IIT Roorkee
Dynamic calibration of a stress wave force balance under various supports and loads using finite element analysis
Sushmita Deka, Pallekonda Ramesh Babu and Maneswar Rahang
Dr. Sushmita Deka
32nd International Symposium on Shock Waves (ISSW32- 2019), NUS Singapore
History of Production and Industrial Engineering through Contributions of Stalwarts
Uday S. Dixit, Manjuri Hazarika and J. Paulo Davim
Dr Manjuri Hazarika
Manufacturing Engineering Education’, Elsevier, ISBN: 9780081012475, 2019
Prediction of Surface Roughness in Milling
Arabinda Baruah, Pranjit Konwar, Iftiqur Alam, Imsusenba, Manjuri Hazarika
Dr Manjuri Hazarika
Research Conclave’19, Students’ Academic Board, I I T Guwahati, 14-17 March, 2019
Investigation of Friction and Wear Behavior of MWCNTs Filled HFRP Composites under Different Sliding Parameters and Different Environment
Dr. Kalyan Kumar Singh, Jiban Jyoti Kalita, Nisha Sarma
Mr. Jiban Jyoti Kalita
Materials Today: Proceedings
Prediction of Surface Roughness in Milling Using Regression Analysis
Anubhav Goswami, Anamitra Phukan, Abhishek Goswami, Manjuri Hazarika
Dr Manjuri Hazarika
Research Conclave’18, Students’ Academic Board, I I T Guwahati, 8-11 March, 2018
Transient dynamic analysis of a cantilever rod with axial impulse loading using finite element method
Sushmita Deka, Pallekonda Ramesh Babu and Maneswar Rahang
Dr. Sushmita Deka
International Conference on Aeronautical, Aerospace and Mechanical Engineering (AAME 2018), Curtin University Malaysia
A Brief History of Mechanical Engineering
U. S. Dixit, Manjuri Hazarika and J. P. Davim
Dr Manjuri Hazarika
Series Title: Materials Forming, Machining and Tribology, Springer International Publishing AG, Cham, Switzerland, 2017
A Review of Rural Electrification in Assam Using Solar Energy Through Decentralized Distributed Generation (DDG)
Anubhav Goswami, Manjuri Hazarika
Dr Manjuri Hazarika
National Conference on Non-conventional Energy: Harvesting Technology and its Challenges, Assam Engineering College, Guwahati ,17-18 October, 2017
Solar Energy Utilization in Raj Bhawan and Bijulee Bhawan, Guwahati: A Case Study
Anubhav Goswami, Anamitra Phukan, A Borah, Manjuri Hazarika
Dr Manjuri Hazarika
National Exhibition & Conference on New and Renewable Energy, ADBU Journal of Engineering Technology (AJET), 6-7 October, 2017
An Experimental Study on Burr Formation in Miilling
B. Sarma, K. Borah, B. Saikia, A. Dhar, M. Hazarika
Dr Manjuri Hazarika
All India Seminar on Recent Trends in Mechanical Engineering, pp. 22–26, The Institution of Engineers (India), Assam State Centre, Guwahati, 21–22 October, 2016
An Experimental Study on Burr Formation in Turning
N. Saha, D. Talukdar, K. Upadhaya, C. Barbhuiya, M. Hazarika
Dr Manjuri Hazarika
International Journal of Innovative Research in Science, Engineering and Technology, Vol. 5, pp. 3215–3222, 2016
An Experimental Study on Burr Formation in Drilling
B. Sarma, K. Borah, B. Saikia, A. Dhar, M. Hazarika
Dr Manjuri Hazarika
2nd Mechanical Engineering Graduate Research Symposium 2015 (MEGRES 2015), Indian Institute of Technology Bombay, Mumbai, 21st March, 2015
Setup Planning for Machining
Manjuri Hazarika and U. S. Dixit
Dr Manjuri Hazarika
Springer Briefs in Applied Sciences and Technology, Springer Cham Heidelberg New York Dordrecht London, 2015
A Green Process Planning system
M. Gogoi and M. Hazarika
Dr Manjuri Hazarika
Proc. of 5th International & 26th All India Manufacturing Technology, Design and Research Conference, December 12th –14th, IIT Guwahati, Assam, India, 2014
An Experimental Study on Green Machining
P. Saikia and M. Hazarika
Dr Manjuri Hazarika
Proc. of 5th International & 26th All India Manufacturing Technology, Design and Research Conference, December 12th –14th, IIT Guwahati, Assam, India, 2014
A method for fine tuning the membership grades assigned by experts: an application to burr height estimation in drilling
M. Hazarika, U. S. Dixit and S. Deb
Dr Manjuri Hazarika, Dr Manjuri Hazarika
Journal of Manufacturing Technology Research, Vol. 4, pp. 75–87, 2012
A Fuzzy Set Based Setup Planning System with Ability for Online Learning
M. Hazarika, S. Deb, U. S. Dixit and J. P. Davim
Dr Manjuri Hazarika
IMechE Part B: Journal of Engineering Manufacture, Vol. 225, pp. 247–263, 2010
A setup planning methodology for prismatic parts considering fixturing aspects’
M. Hazarika, U. S. Dixit and S. Deb
Dr Manjuri Hazarika
International Journal of Advanced Manufacturing Technology, Vol. 51, pp. 1099–1199, 2010
Effect of datum surface roughness on parallelism and perpendicularity tolerances in milling of prismatic parts
M. Hazarika, U. S. Dixit and S. Deb
Dr Manjuri Hazarika
IMechE Part B: Journal of Engineering Manufacture, Vol. 224, pp. 1377–1388, 2010
An Expert System Based Computer-Aided Process Planning Methodology for Setup Planning of Machined Prismatic Parts
M. Hazarika, S. Deb and D. K. Biswal
Dr Manjuri Hazarika
Competitive Manufacturing–Proceedings of the 2nd International & 23rd All India Manufacturing Technology, Design and Research Conference, pp. 1049–1054, IIT Madras, Chennai, 2008
A Study on Abrasive Jet Machining of Glass
M. Hazarika, K.S. Shishodia and G.S. Sekhon
Dr Manjuri Hazarika
Proc. of the 10th ISME Conference on Mechanical Engineering, New Delhi, 1996